Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual User Manual
Page 34
Advertising
Teledyne LeCroy
Expansion Mode using Two Summit T3‐8 Analyzers
22
Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
Standalone Mode
To reconfigure a Summit T3‐8 analyzer to work alone, in Standalone Mode, first turn
power off to the analyzer.
Disconnect the CATC Sync and Expansion cables from the analyzer.
After completing the hardware configuration, power on the Summit T3‐8 analyzer.
Note:
When operating two Summit T3‐8 analyzers in X16 Expansion Mode, neither the TLP Payload
nor the storage protocol triggers (NVMe, AHCI, ATA) are available for selection in the sequencer.
Advertising