Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual User Manual
Page 79
Advertising
Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
67
Recording Rules Overview
Teledyne LeCroy
Figure 5.16: Defining New Events
There are three steps to creating a recording rule:
1. Select events.
2. Place the events in the Global State or Sequence cells.
3. Assign actions to the events.
Note:
There are limits to the types of rules that can be created.
1. Click
and select one or more events from the menu. Selecting an
event automatically places it in the Available Events area. This repository area serves
as a parking lot where you can place event buttons without them having any effect
on the Analyzer.
Advertising