Vestil PM-SCALE - Manual (Page 12)

7
3.0 Operation
3.1 Operation HMI
METTLER TOLEDO
0 F C
Under OK Over NET >|1|< >|2|< lb kg
On/Off Zero Tare Function Clear Print
Battery
Units
Ranges
Function
Motion
Net
T
“Under OK Over” is use for check weighing. You can stick ”Count APW PCS”
label for counting function.
3.2 Basic function operation
3.2.1 On/Off key
Hold the key 2 seconds, All display segments will light. The terminal
will show software part number [178037] [L 1.00]. Then the
terminal will show the normal weight.
In normal display state, Hold this key 2 seconds, the terminal will
show [ -OFF- ], then power off.
3.2.2 Zero
Zero the scale.
3.2.3 Tare
Tare the scale, the display will change to Net mode..
0
T