Vestil PM-SCALE - Manual (Page 14)

9
The terminal show the old target weight..
If F2.2.2 is set to WEIGHt- Get target weight
from weighing. Then you can put the target
weight in scale platform. Press
F
key to
set new target weight.
If F2.2.2 is set to MAnUAL- Manually set the
target weight. You can input target weight
directly, then press Enter to confirm.
Operation :
Current weight less than target weight and over
tolerance.
Current weight near the target weight and
within tolerance.
Current weight larger than target weight and
over tolerance.
z F2.1.1 is set to CLASS- Classifying mode.
Target weight setting:
Press
F
key to switch Over/Under mode.
Hold
F
key for 2 seconds. Or you can
press Tare key to tare the weight.
The terminal show the old target weight..
If F2.2.2 is set to WEIGHt- Get target weight
from weighing. Then you can put the target
weight in scale platform. Press
F
key to
set new target weight.
If F2.2.2 is set to MAnUAL- Manually set the
target weight. You can input target weight
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg