Vestil PM-SCALE - Manual (Page 15)

10
directly, then press Enter to confirm.
Operation :
Current weight less than target weight and over
tolerance.
Current weight near the target weight and
within tolerance.
Current weight larger than target weight and
over tolerance.
3.3.4 Counting Function
F2.1 is set to Count - Counting function.
Stick “Count APW PCS” label at “Under OK Over” position.
Display Mode switch:
Normal display mode.
Press
F
key to switch counting PCS
mode, show current pieces.
Press
F
key to switch counting APW
mode, show average piece weight.
Sampling:
Hold
F
key 2 seconds. Or you can press
Tare key to tare the weight.
Press
F
key to select sample pieces:
5,10,20,50. Put the sample pieces on scale
platform, press Enter to confirm.
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Count APW PCS NET >|1|< >|2|< lb kg
Count APW PCS NET >|1|< >|2|< lb kg
Count APW PCS NET >|1|< >|2|< lb kg
Count APW PCS NET >|1|< >|2|< lb kg
Count APW PCS NET >|1|< >|2|< lb kg
Count APW PCS NET >|1|< >|2|< lb kg