Vestil PM-SCALE - Manual (Page 16)

11
Display mode will go back to counting PCS
mode.
APW Enhancement:
If F2.3 = On, Enable APW enhancement function. Then after the pieces number
increased, the terminal will automatically adjust the average weight to get more
accuracy pieces number.
4.0 Setup
4.1 Enter Setup
Hold key 2 seconds , terminal will show [MAStEr] . Ask for password:
Supervisor password:
0 T 0 T
(Can setup every parameters).
Operatorpassword:
0 0 0
(Can only setup F2).
Press to confirm.Terminal will show [SEtUp] ..
If F1.1 is set OIML or NTEP. Then F1, F5.1 and F5.4 will be disabled for setup. The
only way you can setup them is turn off the terminal, hold the S1 key in PCB, then
turn on the terminal. The terminal will show “SEtUp” directly, now you can setup
everything.
4.2 Keys in setup
0
Previous parameter.
T
Next parameter.
Confirm.
C
Go back to previous setup
F
Go back up level.