Vestil PM-SCALE User Manual
Page 22
Advertising
![background image](/manuals/354403/22/background.png)
14
F5.1.5 – Full load Counts
F5.2 – Keypad test
Terminal show ”PrESS “, You can press Zero, Tare, F, Clear, Print. On/Off key to
exit..
F5.3 – Display test
All display segments will light.
F5.4 – Display internal resolution
Display internal resolution.
F5.5 – COM1 test
Connect COM1 to computer to test COM1..
F5.6 – Print setup
Print all setup parameters..
F5.10 – Reset all parameters to Factory default
Reset all F1~F4 Reset all parameters to Factory default. Not include calibration
values.
F6 – Exit Setup
[SAVE] Press Enter to confirm save changes and exit..
Press Tare key, the terminal will show[AbOrt] , will not save changes and exit..
Advertising