Vestil PM-SCALE - Manual (Page 24)

16
{||||} Over load, more than 9d above
scale capacity Reduce the load
<____> Under Zero 5d Zero the scale
{|no|}
<_no_>
Over the zero range Remove the load
--no-- Key forbidden Check setup
Err 3 EEPROM verify error Reset the terminal
Err 35 Scale is in motion when
calibration Check the scale
Err 4 Samples number too small. Add sample number
Err 6 EEPROM W/R error Replace EEPROM
Err 70 The keys hold too long
The key may be short
Replace keypad
TTerminal auto
power off
Terminal is set auto power off.
Battery voltage to low.
Press On/off key
Recharge battery
TTerminal not light
after power on
Fuse break Replace fuse
5.3 Software download
IND221 and IND226 can download software in the field.
Protocol: 19200,8,None,Xmodem.