ADTRAN 3000 - Manual (Page 117)

Appendix B. Status Buffer Messages
61203153L2-20 Express 3000 User Manual B-3
Bearer Mode?
Incoming call is not of a type the Express 3000 can accept.
Bearer Info Cap?
Incoming call information transfer capability is not known.
BONDING (+/-XXX)
The amount of bytes or corrected delay between the B2 and B1
Bearer channels (XXX can range from -8000 to +8128).
BPS mismatch
Bonding negotiation found a bit rate mismatch.
Break to AT cmd
User issued a break-in request.
Break ignored
User issued an extra break-in request.
BUSY
The called number is busy.
B-X disconnected
B-channel disconnected. X can be 1 or 2 representing the ap-
propriate B-channel.
CallID 1 in use
The Express 3000 tried to place a call using SPID 1 when SPID
1 was already in use.
CallID 2 in use
The Express 3000 tried to place a call using SPID 2 when SPID
2 was already in use.
Call lost
Held call could not be retrieved.
Call not ringing
User executed an answer command (ATA) but there was not
a call present.