ADTRAN 3000 - Manual (Page 41)

61203153L2-20 Express 3000 User Manual 3-1
Chapter 3
Using the Express
Configuration Program
The Express 3000 comes from the factory preconfigured and ready to
use. You can, however, use the ADTRAN Express Configuration Soft-
ware to change and restore these settings. The program also contains
other functions (see Table 3-1).
The ADTRAN Express Configuration program provides a graphical
user interface (GUI) that lets you configure your unit, run diagnostic
tests, display and specify connection settings, apply certain preferenc-
es, run the Express Configuration Wizard, view the software version
Table 3-1. ADTRAN Express Configuration Program Options
Option Function
isdn setup Configures an ISDN profile.
profile setup Configures a User profile.
diagnostics Provides detailed information about the status of the
Express 3000 while it is off-line. You can also
upgrade the unit firmware from here.
preferences Allows you to turn on or off automatic user
configuration features such as Caller ID.
wizard Guides you through the configuration process.
about Displays version and registration information.
help Provides on-line help.
exit Closes the software and, depending on the
preferences settings, opens the Tray Tool.
You can also configure the Express 3000 via VT-100 terminal
emulation (see Chapter 4) and using the AT Commands (see
Appendix A).