ADTRAN 3000 - Manual (Page 72)

Chapter 4. Using VT-100 Terminal Emulation
4-2 Express 3000 User Manual 61203153L2-20
Figure 4-1. VT 100 Terminal Configuration Menu
Accessing Terminal Menus
After establishing a VT-100 terminal emulation session, you can go to
a particular menu by pressing the hot key sequence for that menu (see
Table 4-1). If the hot keys don’t work, ensure that the communications
package is configured to pass these control sequences through to the
Express 3000.
Table 4-1. Menu Hot Keys
Menu Hot Keys
AODI (Ctrl + A)
CONFIG (Ctrl + C)
DIAL (Ctrl + D)
STATUS (Ctrl + V)
TEST (Ctrl + T)
The communications package must be configured to pass
these control sequences through to the Express 3000.