Chapter 4 using vt-100 terminal emulation, Chapter 4 using vt-100 terminal emulation -1, Using vt-100 terminal emulation – ADTRAN 3000 User Manual
Page 71
61203153L2-20
Express 3000 User Manual
4-1
Chapter 4
Using VT-100 Terminal
Emulation
You can configure the Express 3000 using any communications pack-
age that supports VT-100 terminal emulation. Ensure that the
Express 3000 is properly connected to your PC and that it is powered
on before you try to configure your unit.
Configuring the Express 3000 Using VT-100 Terminal Emulation
Step
Action
1
Connect to a VT-100 terminal using a communications
package such as HyperTerminal.
2
At the prompt, enter the command
AT!V
and press the
Enter
key.
(The Configuration screen displays; see
The AT command is not visible as you type since echo is
off by default. To enable echo, type
ATE1
.
3
Enter the following information:
•
Area Code
•
ISDN phone number 1
•
ISDN phone number 2
4
Enable Auto-Detect SPIDs/Switch and any other changes.
5
Enter
Ctrl + X
to exit the menu.