ADTRAN 3000 - Manual (Page 65)

Chapter 3. Using the Express Configuration Program
61203153L2-20 Express 3000 User Manual 3-25
Diagnosing Connection Problems
You can diagnose many connection problems by viewing the Status
Buffer messages returned from the ISDN network and the ADTRAN
Express 3000. Access these messages by clicking the
Status Buffer but-
ton (under diagnostics ).
Launching Terminal Programs
Launch the terminal program specified in the preferences option
( Program Name ) by clicking the Terminal button (under diagnostics ).
Diagnosing Remote Units
With the diagnostics option, you can collect information about re-
mote units. Enter the phone number of the remote unit and a pass-
word, if required. Then click on the appropriate button to access the
information you want. Buttons include
Test , Register Dump , Config ,
and Status Buffer .
Testing a Remote Unit
Follow the steps below to begin testing a remote unit.
Configuring a User Profile on a Remote Unit
To configure a User profile on a remote unit, click the Config button
(under diagnostics ). (See also Using Profiles on page 3-7.)
Retrieving Current Settings from a Remote Unit
To retrieve the current settings from a remote unit, click the Register
Dump button (under diagnostics ). The current settings display in a
format identical to the Preview list (see Preview Tab on page 3-11 or
page 3-18).
Instructions for Testing a Remote Unit
Step Action
1 Click the Test button (under diagnostics).
2 Choose the number of B channels with which to test.
3 Click Start to begin the remote test.