ADTRAN 3000 - Manual (Page 48)

Chapter 3. Using the Express Configuration Program
3-8 Express 3000 User Manual 61203153L2-20
Figure 3-3. ISDN Profile Setup Window
General Tab
The General Tab contains fields for setting ISDN line information such
as switch type, area code, phone numbers 1 and 2, and SPIDs 1 and 2.
In addition, you can disable the automatic detection of SPIDs. Also,
you can enter feature activator codes for conference calling, call trans-
fer, and message waiting.
Switch Type
Defines the switch type for the local version of the software, either
AT&T 5ESS, DMS - 100, National ISDN-1, or NEC Switch. If you
are running the International version of the Express Configura-
tion Wizard, five additional switch types are available: Euro IS-
DN, VN4, NTT, KDD, or TDX. (The telephone company should
provide this information as part of the ISDN Line installation; if
this information is not provided, contact the telephone company.)
Area Code
Sets the area code for the ISDN lines. The area code is the same for
both B channels. Enter the area code only if you plan to use the
AutoSPID algorithm to automatically detect the Switch Type and
SPIDs.