AMX Wireless Touch Panels (Wave Server) - Manual (Page 110)

100 Touch Panel Program Reference ViewPoint Wireless Touch Panels
Button Types (Cont.)
Button Type Description
Vertical Bargraph Sets the button to a vertical bargraph or slider. Feedback for bargraph
or slider response comes from the Central Controller.
Horizontal Bargraph Sets the button to a horizontal bargraph or slider. Feedback for
bargraph or slider response comes from the Central Controller.
Brightness Sets the button to open the BRIGHTNESS page. This page shows the
color palette and brightness/contrast buttons.
Time Displays the current time supplied by the Central Controller on the
button.
Date Displays the current date supplied by the Central Controller on the
button.
Keypad Sets the button to open the keypad so you can enter a password or
value assignment.
Keyboard Sets the button to open the keyboard so you can enter a name or
string.
Setup Sets the button to open the Setup page.
Video Setup Sets the button to open the Video Setup page so you can set the
incoming video display on the touch panel.
Video Window Sets the button to a video window to display the incoming video signal.
Video Joystick Sets the button to a video joystick that displays the incoming video
signal, and a control stick. When you move the control stick, the touch
panel sends feedback (data) to the Central Controller and to the
external device to perform a pre-programmed operation.
RGB Setup Sets the button to open the RGB Setup page so you can adjust the
incoming video signal on the touch panel.
Protected Sets the button to require correct page password entry before
performing the assigned page flip.
General
Select GENERAL from the Button Types menu to set the selected button as a General
button. A General button automatically sends a message to the AXCESS Central
Controller via the AXlink connector, to the PC via the RS-232 connector, or wireless
receiver. The button type General and associated options appear in the PROPERTIES
page as shown in Figure 154.
Note
The VIDEO SETUP, VIDEO
WINDOW, VIDEO
JOYSTICK, AND RGB
SETUP button types are not
available on the MCP.
Note
A NO RGB HW button
appears on this touch panel
because it is not video
compatible.