AMX Wireless Touch Panels (Wave Server) - Manual (Page 119)

ViewPoint Wireless Touch Panels Touch Panel Program Reference 109
When a control level is set on the horizontal bargraph, control data is sent to
the Central Controller to control an external device.
— BARGRAPH CENTERING Sets the bargraph as a vertical controller with a
default control level. Levels must be defined in the AXCESS software
program. When a control level change is sent to the Central Controller, the
external device changes accordingly until the control data input stops. Then
the control level on the horizontal bargraph returns to the default position
and the external device returns to a default control position.
— SLIDER DISPLAY Sets the slider as a horizontal status indicator for
external devices. Levels must be defined in the AXCESS software program.
— SLIDER ACTIVE Sets the slider as a controller for external devices.
Control levels must be defined in the AXCESS software program. When a
control level is set on the horizontal bargraph, data is sent to the Central
Controller to control an external device.
— SLIDER CENTERING Sets the slider as a horizontal controller with a
default control level. Control levels must be defined in the AXCESS software
program. When a control level change is sent to the Central Controller, the
external device changes accordingly until the control data input stops. Then
the control level on the bargraph returns to the default position and the
external device returns to its default control position.
— BATTERY VOLTAGE Sets the button to show the voltage level of the
battery (if equipped).
• STRING Opens the keyboard where you enter the data string to be sent
to the Central Controller via AXlink, RS-232, or RF communications. The
data string appears in the STRING button. Press ABORT to close the menu.
For a description of the other items in this page, refer to the Properties subsection.
Brightness
Select BRIGHTNESS from the Button Types menu to set the selected button as a
Brightness button. The button type BRIGHTNESS and associated options appear in
the Button Properties page as shown in Figure 166.