AMX Wireless Touch Panels (Wave Server) - Manual (Page 115)

ViewPoint Wireless Touch Panels Touch Panel Program Reference 105
— JOYSTICK NON-CENTER Sets the button to a four-quadrant joystick with
a control stick. When you remove your finger from the screen, the control
stick and external device stay in that position.
— JOYSTICK CENTER Sets the button to a four-quadrant joystick with a
control stick located in the center. When you remove your finger from the
screen, the control stick returns to the center of the button and the external
device returns to its default position.
— CROSSHAIR NON-CENTER Sets the button to a four-quadrant crosshair
with a control stick located in the center. When you move the control stick,
the touch panel sends feedback (data) to the Central Controller and to the
external device to perform a pre-programmed operation. When you remove
your finger from the screen, the control stick returns to the center of the
button and the external device returns to its default position.
— CROSSHAIR CENTER Sets the button to a four-quadrant crosshair with a
control stick. When you move the control stick, the touch panel sends
feedback (data) to the Central Controller and to the external device to
perform a pre-programmed operation. When you remove your finger from
the screen, the control stick and external device stay in that position.
• STRING Opens the keyboard where you enter the data string to be sent to
the Central Controller via AXlink or RF communications. The data string
appears in the STRING button. Press ABORT to close the menu.
For a description of the other items in this page, refer to the Properties subsection.
Figure 161
BUTTON OPTION menu
Joystick button
Note
When you move the control
stick, for both joystick buttons,
the touch panel sends
feedback (data) to the Central
Controller and to the external
device to perform a pre-
programmed operation.