AMX Wireless Touch Panels (Wave Server) - Manual (Page 130)

120 Touch Panel Program Reference ViewPoint Wireless Touch Panels
This sets the button as a Protected button. Protected buttons are similar to General
type buttons, except that they require the user to enter a password to flip to the
specified destination page. Pressing a Protected button opens the Keypad. Use the
Keypad to enter the correct password. If the correct password is entered, the page
flips to the specified destination page. If the correct password is not entered, no page
flip occurs.
To set the Page Password, open the Protected Setup page, and press PAGE
PASSWORD. This opens the keypad. Enter the password (up to 5 digits) and press
ENTER to set the Page Password. For more information on passwords, refer to the
Protected Setup Page section.
Properties Page - External Buttons
The following paragraphs describe how to configure the External buttons in the
Button Properties page. Certain features on the BUTTON menu are not applicable to
external pushbuttons because they are not created by the firmware but rather are a
part of the panel hardware itself. The only features that are applicable from the
BUTTON menu are the TEXT/IMAGE and PROPERTIES buttons. The steps used to
configure the external pushbutton’s text/image are identical to those for the buttons
created using the panel’s firmware. Refer to the Text/image subsection for detailed
information about associating text with a button.
Figure 180
Button Properties page for a
Protected button