AMX Wireless Touch Panels (Wave Server) - Manual (Page 70)

60 Touch Panel Program Reference ViewPoint Wireless Touch Panels
Beep
The Beep button sets the duration of the audible beep provided by the touch panel.
The values are 0 to 5. Using 0 turns the beep tone off and 1 through 5 provide the
audible beep and gradually increase the beep duration.
Display timer
The DISPLAY TIMER button (Figure 82) sets the length of time the touch panel can
be idle before activating screen-saver sleep mode.
Figure 80
Setup page
Note
The WIRELESS STATUS
button appears when a WAV-
PK or SMT-PK is attached to
the touch panel.
Figure 81
BEEP button
Note
You can set the beep value
using the 'ABEEP' and
'ADBEEP' Send_ Commands
described in the AXCESS
Programming section. The
'QBEEP' command is used for
overriding.
Optional
WIRELESS
STATUS button
for WAV-PK and
SMT-PK wireless
control