AMX Wireless Touch Panels (Wave Server) - Manual (Page 29)

ViewPoint Wireless Touch Panels Designing Touch Panel Pages 19
Designing Touch Panel Pages
Overview
These step-by-step instructions describe creating touch panel pages, buttons,
joysticks, bargraphs, and setting page color attributes. For in-depth information on all
the operations available on the touch panel, read through the Touch Panel Program
Reference section to learn about all the operations and techniques you can use to
design touch panel pages.
The VPT-CP and VPT-GS ViewPoint one-way models do not support bargraphs,
joysticks, VGA, or Video. These functions are available on the EDIT dropdown
menus and can be setup. However, the functions are not operational.
The VPW-CP and VPW-GS are two-way RF and supports bargraphs and joysticks.
Activating the Edit button
Before designing a touch panel page, activate the EDIT button that contains options
to add and configure touch panels and buttons. When powering up the mini-touch
panel, the first page is the Main page shown in Figure 18. Refer to Edit button and Go
to information in Touch Panel Program Reference if the Main page does not appear.
Note
Information within this section
applies to all ViewPoint
models except as noted.
Note
If you have a pre-programmed
panel, you may not see the
Main page.
Figure 18
Main page