AMX Wireless Touch Panels (Wave Server) - Manual (Page 45)

ViewPoint Wireless Touch Panels Designing Touch Panel Pages 35
Using TPDesign3 to Download Bitmaps, Icons, and Fonts for more information on
importing icons into your touch panel.
1. Press EDIT to open the Edit bar.
2. Press BUTTON on the Edit bar to open the BUTTON menu.
3. Press TEXT/IMAGE to add text to the button. The TEXT/IMAGE operation bar
appears.
4. Press the target button to open the Text/Image page.
5. Press ICON OFF to set the icon for the OFF state of the selected button. This
opens the ICONS menu (Figure 45), which contains a list of all the icons
currently available to the project
6. Select an icon from the menu. This sets the icon for the selected button’s Off state
7. On the Text/Image page, press MAKE ON SAME AS OFF to set the icon for both
On and Off states of the button.
8. Press EXIT SAVE CHANGE to set the button text and close the Text/Image page
and return to the NEW page.
9. Press EXIT in the Edit bar to exit Edit Text/Image mode and close the Edit bar.
Adding a bitmap to a button
Use the BUTTON option in the Edit bar to add bitmaps to buttons, joysticks,
bargraphs, and video windows. Refer to
Figure 45
ICONS menu example