Input circuit drawings ‹ internal circuit ‹ wiring – Proface AGP3500 - 10.4 DIO HMI" User Manual

Page 19

Advertising
background image

19

„

Input Circuit Drawings

‹ Internal Circuit

‹ Wiring

indicates a fuse.

indicates load.

• The relay specifications can change the COM power supply.

• Since the output terminals are not electrically protected, an output line might be shortcir-

cuited or a connection fault might damage this product. Please install an applicable fuse to
prevent an overload in the circuit, if necessary.

• The COM0 and COM1 terminals are not connected together internally.

• Please be sure to refer 1.Essential Safety Precautions“About the Relay Output Inductive

Load”, page 3

Internal Circuit

N.O

COM

Terminal Block

Qx (Load)

L

<EXM-DRA8RT>

<EXM-DRA16RT>

Q0 0
Q1 1
Q2 2
Q3 3

COM0

NC

Q4 4
Q5 5
Q6 6
Q7 7

COM1

Q0 0
Q1 1
Q2 2
Q3 3
Q4 4
Q5 5
Q6 6
Q7 7

COM0
COM0

Q8 8
Q9 9

Q10 10

Q11 11

Q12 12
Q13 13
Q14 14
Q15 15

COM1
COM1

/

U

*1

*1

1

1

*1 Protection for inductive load

Advertising
This manual is related to the following products:

AGP3400 - 7.5 DIO HMI", AGP3300 - 5.7 DIO HMI", AGP3600 - 12.1 FLEX Network HMIs", AGP3500 - 10.4 FLEX Network HMI", AGP3400 - 7.5 FLEX Network HMI", AGP3600 - 12.1 CANopen HMI", AGP3500 - 10.4 CANopen HMI", AGP3400 - 7.5 CANOpen HMI", AGP3300 - 5.7 CANopen HMI", LT3200 - 3.8 All-in-One HMI", AGP3300H - 5.7 Handheld HMIs", AGP3750 - 15 Multi-Media HMI", AGP3650 - 12.1 Multi-Media HMIs", AGP3550 - 10.4 Multi-Media HMIs", AGP3450 - 7.5 Multi-Media HMI", AGP3360 - 5.7 Multi-Media HMI", AST3300 - 5.7 Basic HMI", AST3200 - 3.8 Basic HMI", AGP3600 - 12.1 Standard HMIs", AGP3500 - 10.4 Standard HMIs", AGP3400 - 7.5 Standard HMI", AGP3300 - 5.7 Standard HMI", AGP3200 - 3.8 Standard HMI"

Popular Brands
Popular manuals