Proface AGP3500 - 10.4 DIO HMI" User Manual

Page 27

Advertising
background image

27

*1 Total input system transfer time = sample repetition × 2 + 1 scan time.
*2 The 12-bit data (0 to 4095) processed in the Analog I/O module can be linear converted to a value

between -32768 and 32767. The optional range designation and analog I/O data minimum and maximum
values can be selected using data registers allocated to analog I/O modules.

*3 If the input data is not in the range, the error code RGEF130 (Input data error) is output for the analog

module. Once the error occurs, input data from the point of the error is no longer updated. For more
information about error codes, read the “Maintenance/Troubleshooting Guide”.

*4 The input value may be regarded as "Input Data Out of Range" due to the maximum error even when it

is in the specified input range. Before inputting the value, therefore, consider the maximum error.

*5 Only when connected to Hybrid Terminal Block (HTB)

Data

Digital
Resolution

4096 increments (12 bits)

Input Value of
LSB

2.5 mV

4.8 µA

Pt: 0.20 °C
(32.36 °F)
Ni: 0.05 °C
(32.09 °F)

Data Type in
Application
Program

0 to 4095 (12 bit)
Custom range up to -32768 to
+32767*

2

Celsius /
Fahrenheit

Input Data Out
of Range

Detectable*

3

*

4

Noise
Resistance

Cable

Twisted-pair shielded cable is recommended for
improved noise immunity

Crosstalk

1 LSB max.

Voltage Endurance

2500 VAC between inputs, external power supply
and internal logic circuits

Isolation Method

Photocoupler Isolation between input and internal
circuit (1500 VDC isolation)

Maximum Permanent Allowed
Overload (No Damage)

13 VDC

40 mA

-

Selection of Analog Input Signal
Type

Using software programming

All inputs have the same voltage/current configuration or
temperature. For temperature, it is possible to configure
each channel independently of the type of probe.

Calibration or Verification to
Maintain Rated Accuracy

Approximately 10 years

Default input value in case of
temperature sensor
disconnection

Upper limit

*5

External Connection

11-pin terminal connector

EXM-AMI4LT

Characteristics of Analog Voltage Inputs

Voltage Input

Current Input

Temperature Probes

Advertising