Ul/c-ul approval, Ce marking, Revision – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 7
7
7.
UL/c-UL Approval
The following unit is UL/c-UL listed
product: (UL File No. E210412)
This product conforms to the following
standards:
• UL508
Industrial Control Equipment
• UL1604
Electrical Equipment for Use in Class I and
II, Division 2, and Class III Hazardous
(classified) Locations
• CSA-C22.2 No.142-M1987 (c-UL Approval)
Standard for Process Control Equipment
• CSA-C22.2 No.213-M1987 (c-UL Approval)
Non-Incendive Electrical Equipment for
Use in Class I, Division 2 Hazardous
Locations
UL1604/CSA-C22.2, No.213 - Compliance
and Handling Cautions
This equipment is suitable for use in Class
I, Division 2, Groups A, B, C, D or non-
hazardous locations only.
Warning - Explosion Hazard - Substitution
of components may impair suitability for
Class I, Division 2.
Warning - Explosion Hazard - Do not
disconnect equipment unless power has
been switched off or the area is known to
be non-hazardous.
8.
CE Marking
This unit is CE marked product that
conforms to EMC directives, EN55011
Class A and EN61131-2.
9.
Revision
The revision is printed on the attached
nameplate.
EXM-DDI8DT
EXM-DMM24DRF
EXM-DDI16DT
EXM-AMI2HT
EXM-DRA8RT
EXM-AMI4LT
EXM-DRA16RT
EXM-AMO1HT
EXM-DDO8UT
EXM-ALM3LT
EXM-DDO8TT
EXM-AMM3HT
EXM-DDO16UK
EXM-AMM6HT
EXM-DDO16TK
EXM-ARI8LT
EXM-DMM8DRT EXM-AVO2HT