Proface APL3000B - Node Box PC - Manual (Page 16)

Chapter 1 Setting Up Software
1-9
1.4 PS-A Dedicated Software
1.4.1 Driver
Five types of dedicated PS-A drivers (Serial ATA Controller, Chipset, Audio, Graphic Accelerator, LAN and
Touch Panel Driver (Mouse Emulator) ) are available.
If you purchased the PS-A with no pre-installed OS, download the drivers from the Pro-face support site
“Otasuke Pro!”. (A PS-A unit that has been recovered using the Recovery Media will have all the required
drivers installed.)
The explanation given in this section assumes that the [Proface] folder has been created on drive C.
„ Serial ATA Controller Driver
Serial ATA Controller driver made by SiliconImage.
Installing the driver enables PS-A with no pre-installed OS to install OS.
„ Chipset Driver
Chipset driver made by Intel
®
.
Installing the driver enables OS to recognize USB or Core PCI and use them properly.
„ Audio Driver
AC97 Audio Codec driver made by Realtek.
Installing the driver enables the sound functions to be available.
„ Graphic Accelerator Driver
Display driver made by Intel
®
.
Installing the driver enables to display the screens properly.
„ LAN Driver
Gigabit Ethernet Controller driver made by Realtek.
Installing the driver enables LAN2.
• Do not uninstall the drivers which have been installed in the PS-A unit.
• For the procedure and precautions regarding the installation, visit the download page at the
“Otasuke Pro!” site.
http://www.pro-face.com/otasuke/
• LAN1 is the standard driver. You are not required to install a LAN driver.
• The LAN2 port can be used for starting the PS-A via LAN.
SEE 3.7 Restarting/Shutting Down the PS-A from a Remote Server (page3-26)