2 smart, 2 smart -35 – Proface APL3000B - Node Box PC User Manual
Page 86
Chapter 3 PS-A Monitoring Features
3-35
3.9.2
SMART
Item
Operation
Device No.
Displays the number assigned to the hard disk to be monitored.
Model
Displays the model of the hard disk.
Status
Specifies the item to be monitored. The status of each monitoring item is
displayed.
[O.K.]: Normal
[Alert]: Alert
[Disable]: Not monitored
[Not Supported]: Not supported
•
[Not Supported] is displayed when a device like a CF card, which does not
support SMART, is detected.
Buzzer Off
When [Buzzer] is selected for the alert notification method, you can stop
the buzzer by clicking [Buzzer Off].
Reset
When an alert is detected, clicking [Reset] recovers the System Monitor
from the “alert” status.
•
After an alert is resolved, make sure to reset. If reset is not performed, the alert
history remains, which causes the alert to be detected again even if it was
resolved. For alert recovery procedures, refer to the following section:
Minimize
Stores the System Monitor screen in the task tray.
SEE