Proface APL3000B - Node Box PC User Manual
Page 28
Chapter 2 System Setup
2-7
Local Bus IDE adapter
Specifies an enabled/disabled state for the IDE controller. Select from [Enable] or [Disabled]. The factory
default setting is [Enable].
Advanced Chipset Control
Point the cursor to the [Advanced Chipset Control] and press the [Enter] Key, so that you can set up details.
I/O Device Configuration
Point the cursor to the [I/O Device Configuration] and press the [Enter] Key, so that you can go to the Serial
Port Setting screen.
Power-ON Configuration
Point the cursor to the [Power-ON Configuration] and press the [Enter] key, so that you can go to the set-up
screen for power-ON related operations.
Keyboard Features
Point the cursor to the [Keyboard Features] and press the [Enter] Key, so that you can go to the keyboard set-
up screen.
Cache Memory
Point the cursor to the [Cache Memory] and press the [Enter] Key, so that you can go to the set-up screen for
Cache Memory.
PCI Configuration
Point the cursor to the [PCI Configuration] and press the [Enter] Key, so that you can go to the set-up screen
for PCI IRQ.
DMI Event Logging
Point the cursor to [DMI Event Logging] and press the [Enter] Key to go to the set-up screen for DMI event
logging.
Disable ACPI_Sx
Specifies the API’s state. Select from [None] or [S1]. With this action, the selecting state will be enabled. The
factory default setting is [None].
SEE
Advanced Chipset Control (page2-9)
SEE
I/O Device Configuration (page2-11)
SEE
Power-ON Configuration (page2-12)
SEE
SEE
SEE
SEE