Proface APL3000B - Node Box PC - Manual (Page 96)

Chapter 4 Troubleshooting
4-5
4.2 Recovery Procedure
4.2.1 PS-A with no Pre-installed OS
Refer to the manual for the installed OS and recover the OS.
When the OS is recovered, set up the software.
4.2.2 PS-A with Pre-installed OS (Windows
®
XP)
Use the following steps to recover the system.
(1) Turn on the power of PS-A and immediately press the [F2] key to enter the BIOS setup screen. Insert the
Recovery media into the drive.
(2) On the [Boot] menu, move the name of the drive inserted the Recovery Media to the top of the screen
using the [+] key or the [-] key.
(3) Press the [F10] key and select [Yes] for [Save configuration changes and exit now?] to save the settings
and restart the PS-A unit.
(4) After the PS-A unit restarts, the Symantec Ghost™ will automatically start.
SEE 1.2.2 Setting Up the PS-A Dedicated Software (page1-2)
• After performing recovery, the PS-A unit is returned to its factory shipped condition.
• For recovery, a commercial USB keyboard and DVD-ROM drive are required.
• Do not connect the external storage unit such as USB device and CF Card while
the recovery.