Proface FP3900 - 19 Flat Panel" - Manual (Page 19)

FP-3710K Series User Manual
1-2
1.1 FP-3710K Series
The FP can be connected to Pro-face’s PS-2000B, PS-3000B, PS4000 series, PL3000 Series or to a
Windows
®
compatible PC.
For image signal connection, cables vary depending on a device to be connected.
*1 When a keyboard, mouse pointer, and USB I/F are used, it is necessary to connect the FP with
a computer using the USB cable (FP-US00).
SEE 1.2 Cables for connecting with computer (page1-3)
• The FP unit’s slide switches set the type of cable(s) used for sending touch data (USB or
RS232C).
SEE 6.1.1 Preset Settings and Adjustments for Dip Switch and Slide Switch (page6-2)
For Touch data transmission
USB Cable (FP-US00<5m>
*1
)
(A-B type Cable)
Or
RS-232C Cable(FP61V-IS00-0<5 m>)
(Straight Cable: Dsub 9-pin female)
Touch Panel transmission
Image Signal Output
USB I/F
*1
For downstream port of FP’s embedded
USB-HUB (Type-A connector)
DVI-D Cable
Or
Analog RGB Cable
Or
DVI-A - RGB Conversion Cable
FP unit
Peripherals complied
with USB2.0/1.1
(Commercial products
such as USB
keyboards)
F
ront Si
de
PS-2000B, PS-3000B,
PS4000 Series,
PL3000 Series or
Windows
®
Compatible
PC