3 interface specifications, 3 interface specifications -5, 3 interface specifications analog rgb interface – Proface FP3900 - 19 Flat Panel" User Manual
Page 36
Chapter 4 Specifications
4-5
4.1.3
Interface Specifications
Analog RGB Interface
Display Area
The number of dots (pixels) displayed are as follows.
Input signal type
Analog RGB
Input signal
characteristic
Image signal: analog RGB
Synchronous signal: TTL level, negative polarity or positive polarity
Scanning type: non-interlaced
Setting via OSD
(On Screen Display)
• CONTRAST
• H-POSITION
• H-size
• DIMMER (BACKLIGHT)
• ALL RESET (DEFAULT)
• BRIGHTNESS
• V-POSITION
• PHASE
• SHARPNESS
Size
H.Sync.
(kHz)
V.Sync.
(Hz)
Dot Clock
(MHz)
Screen
Resolution
Expansion
(H: Horizontal)
(V: Vertical)
Display
Resolution
640 Ч 400
24.827
56.420
21.053
Ч 1.6(H)
× 1.92(V)
1024 Ч 768
640 Ч 400
31.469
70.000
25.175
640 Ч 480
31.469
59.992
25.175
Ч 1.6
640 Ч 480
37.500
75.000
31.500
640 Ч 480
35.000
66.670
30.240
720 Ч 400
*1
*1
When you use this resolution, set “ON” for “720 × 400 Mode” in the OSD (On Screen Display)
system settings.
31.469
70.000
28.320
× 1.42(H)
× 1.92(V)
800 Ч 600
37.879
60.317
40.000
Ч 1.28
800 Ч 600
46.875
75.000
49.500
1024 Ч 768
48.363
60.004
65.000
Ч 1.0
1024 Ч 768
56.476
70.069
75.000
1024 Ч 768
60.023
75.029
78.750