Proface FP3900 - 19 Flat Panel" - Manual (Page 59)

FP-3710K Series User Manual
6-2
6.1 Operation Mode Setup
6.1.1 Preset Settings and Adjustments for Dip Switch and Slide Switch
The Dip Switches and Slide Switch are located in the bottom of the FP unit.
Loosen the screws of the cover with a Phillips head screwdriver and then remove the cover. After setting the
dip switches and slide switches, reinstall the cover and screws with the screwdriver. The tightening torque for
those screws is 0.5 to 0.6 N•m.
Bottom
Dip Switches (SW1)
Slide Switch (SW2)
Cover