Proface FP3900 - 19 Flat Panel" User Manual
Page 53
FP-3710K Series User Manual
5-8
Power connector specification
Wiring
Use the following wiring for FP. Those are Phoenix Contact products.
Connecting the Power Cord
When connecting the AC type power cord, be sure to follow the procedures given below.
(1)
Confirm that the power cord is unplugged from the power supply.
(2)
Push the Opening button by a small and flat screw driver to open the desired pin hole.
(3)
Insert each pin terminal into its each hole. Release the Opening button to clamp the pin place.
L
AC Input Terminal-live line
N
AC Input Terminal-neutral line
FG
Ground Terminal connected to the FP chassis
•
Kind of power cord is FKC 2,5/3-STF-5,08 which are Phoenix Contact
*1
products.
*1
Please contact Phoenix Contact for the details.
Recommended Drivers
SZS 0.6X3.5 (1205053)
Recommended stick end terminal
AI 0.75-10GY(3201288)
AI 1-10RD(3200182)
AI 1.5-10BK(3200195)
AI 2.5-12BU(3200962)
Crimp tool for recommended stick end terminal
CRIMPFOX ZA 3 (1201882)
L
N
FG
Power Cable Joint
L
N
FG
AC power supply cord
Opening Button