Proface FP3900 - 19 Flat Panel" - Manual (Page 61)

FP-3710K Series User Manual
6-4
6.2 Screen Display Adjustment
6.2.1 Calibration of OSD Display Position
You can operate the FP screen menus via the touch panel, and adjust screen image display to a minute level.
The feature is called OSD (On Screen Display).
This section describes items and functions that can be set with OSD.
(1) How to start the OSD
„Starting the OSD
To start the OSD and enter OSD mode, press the three
corners of the touch panel in the following order
(upper left (1) a upper right (2) a lower right (3))
within 5 seconds. In OSD mode, the setting screen is
displayed in the center of the screen. In this mode, the
touch panel cannot be used to export data to external
devices unless the settings for the OSD are completed.
• OSD is not displayed when there
is no input image.
• OSD is not displayed when a SW
1-2 is ON.
Displayed screen
(1) (2)
(3)