Proface FP3900 - 19 Flat Panel" - Manual (Page 69)

FP-3710K Series User Manual
7-2
7.1 Touch Interface Data
The FP-3710K Series units use an analog type touch panel. This touch panel needs a calibration program to
adjust the actual touch position.
The display resolutions is 1024 × 768.
The screen display origin point is at the upper left corner of the screen. Therefore, a mouse emulation software
to convert the touch coordinates to display coordinates is needed.
„Touch Panel Coordinate Data
(1) Resolution
Both the X and Y coordinates have a resolution of 1024.
The origin point (0,0) is located in the upper left corner of the screen.
• For details on the mouse emulation software, refer to "Related
Software".
SEE 2.1.3 Related Software (page2-6)
Touch Panel Coordinates
(0,0)
Display Coordinates
(0,0)
Touch Panel Coordinates
(1023,1023)
Display Coordinates
(1023,767)