Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 144)

<5. Display and Operations while Connected to GC1000 Mark II>
5-34
IM 11B06C01-01E
The specified area is enlarged and fills the window.
F5-3-16.ai
• Selecting the Partial Zoom in button automatically deactivates the auto-scale function.
• You can also achieve the same results using the Partial Enlargement command in the
[Scale] menu.
• The enlargement display range specified using the partial enlargement feature and the
range actually displayed in the Enlargement Display area may differ from each other due to
limitations of the program.
n Temporary Saving (Snapshot)
Temporarily saving the enlarged window
l Operation procedure
(1) Click on the Snap 1 button ( ) on the toolbar.
The Snap 1 button lights up in red, and the chromatogram being display is temporarily
saved to memory.
(2) If you want to see the detailed display again after returning to the original display, click the
Snap 1 button with its red lamp lit.
The chromatogram saved in Snap 1 is redisplayed.
(3) To erase the temporarily saved chromatogram, click on the Clear command in the Option
menu.
The chromatogram is erased and the red lamp of the Snap 1 button goes off.
• Two types of chromatograms can temporarily be saved in Snap 1 and Snap 2.
• You can also achieve the same result using the Snapshot command in the Option menu.
• Snap-1 and Snap-2 data are automatically erased with every analysis cycle.
n Overall display
l Operation procedure
Click on the Full Display button ( ) on the toolbar.
The position and scales of the chromatogram are recalculated, and you are returned to the
original window.
• You can also achieve the same results using the Overall Display command in the Scale
menu.
5th Edition : Nov. 16, 2011-00