Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 171)

<6. Display and Operations of Windows while Connected to ASIU>
6-8
IM 11B06C01-01E
6.3.2 Window Configuration
The ASIU Operation window is intended to display and operate the contact output statuses.
n Element Names and Functions
F6-3-2.ai
Tag No.: Used to identify the contact outputs. Tag numbers are set in the DO
Setting dialog box.
Signal: This is additional information for the contact outputs. Settings are made in
the DO Setting dialog box.
Contact Output button: Displays the contact output statuses (ON/OFF). You can change the
contact output statuses. (This requires user level “B” or “C.”)
6.3.3 Contact Output Operation
The ASIU Operation window allows you to operate the contact outputs.
n Operating Contact Outputs
(1) Double click on the contact output button at which you wish to make change. Then, a
message box appears confirming that you want to change the DO setting.
(2) Click the OK button to change the contact output status.
(The output status operates by changing to ON, OFF, ON, and so on, like a toggle switch.)
5th Edition : Nov. 16, 2011-00