Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 83)

<4. Display and Operations while Connected to GC8000>
4-36
IM 11B06C01-01E
Figure 4.40 Example of display in auto gain
4.4.7 Gate Mark, Peak Mark, and Start Mark
In mark settings, if you select gate mark, peak mark, and start mark to be displayed, they are
displayed in chromatogram in the enlargement display area.
Gate OFF
Peak OFF
Start mark
Gate ON
Peak ON
Figure 4.41 Example of displaying gate mark, peak mark, and start mark
4.4.8 Additional Information (Peak No., Peak Name, etc.)
Among the following data items, up to two items can be displayed in the Enlargement Display
window.
- Relative peak number, - Peak name (up to 8 characters), - Gain (multiplying factor is
displayed in “G:n” where n = 0 to 15), - Range (displayed in “Rng: XX.XX unit”), - Standard
concentration (displayed in “S.Cnc:XX.XX unit”).
Click on the Set Mark command in the Graph menu to display the Set Mark dialog box. Select
data from the additional information 1/additional information 2 lists. If you want to hide data,
select “None”. In case of off-line, peak number is only indicated.
The following shows examples of displaying additional information.
Range and
standard concentration
Peak name
and gain
Figure 4.42 Examples of displaying gate mark and peak mark
5th Edition : Nov. 16, 2011-00