App index – Yokogawa Standalone MW100 User Manual
Page 129
3-7
IM MW100-01E
Setting and Data acquisition
1
2
3
4
5
App
Index
Changing the IP Address and Connecting
This is used when an IP address has already been set, and the IP address will be
changed by browser or DHCP before connecting. To change the IP address, follow steps
1-6 and 10-11. For changes by DHCP, follow steps 1-3 and 7-11.
1.
From the
Top screen, click Communication Setting > IP Address Setting.
2.
Enter a host name in the
Host Name box under DNS Information. Enter the host
name as necessary when you change the IP address.
3.
Enter a domain name in the
Domain Name box under DNS Information. Enter the
domain name as necessary when you change the IP address.
4.
Enter a fixed IP address in the
IP Address box under IP Address Information.
5.
Enter a subnet address in the
Subnet Mask box under IP Address Information.
6.
Enter a default gateway address in the
Default Gateway box under IP Address
Information.
7.
To enable the DHCP client function, select the
DHCP Client Function check box.
8.
To obtain DNS information from the server, select the
DNS Information check
box.
9.
To register a host name on the server, select the
Host Name check box.
10.
Click the
Apply button.
11.
Power cycle the MW100.
The setting changes are applied.
3.2 Communication Settings