Yokogawa Standalone MW100 - Manual (Page 180)

3-58
IM MW100-01E
Monitor Display Switching and Group Selection
Select the Display Group
Select the display group you
wish to display.
Select message
Select a message to write.
1 to 5 messages can be set in advance.
Select a Monitor Display
Select a monitor display type.
• Overview
• Meter
• Bar graph
• Digital
• Trend
Free message box
Text can be entered when Free is selected
in the message selection list.
Message button
Writes the selected message.
Manual sample button
Performs a manual sample.
Writes data to the manual sample file from the CF card.
Data View button
Displays alarm summaries, manual samples, or reports
in a separate window.
Select a Background Color
Switch background color between white and gray.
Contents of the Status Bar
Memory capacity of the CF card
Used space (%) displayed with a green bar.
When the CF card is not installed,
the Ejected display appears.
Measurement group recording operation (1 to 3)/
thinning recording operation status (T)/
report recording operation status (R)
Recording: Yellow
Trigger wait state: Green
Stop state: Gray
MATH processing performance
(with the /M1 option or when a pulse input module is installed)
When computation processing reaches 100%, data loss occurs.
MW100 serial number
MW100 firmware version
3.16 Measured Data Monitor Display/Settings