Yokogawa Standalone MW100 User Manual
Page 134
3-12
IM MW100-01E
Modbus Client Setting 2
Register the server to which commands are sent. Use the number of the registered
server for Modbus client setting 3.
1.
From the
Top screen, click Communication Setting > Modbus Client Setting 2.
The server list is displayed.
2.
Enter the server name in the
Server box.
3.
Enter the server port number in the
Port box.
4.
Click the
Apply button. The setting changes take effect.
Modbus Client Setting 3
1.
From the
Top screen, click Communication Setting > Modbus Client Setting 3.
2.
Enter settings in the same manner as for
Modbus Master Setting 2. Enter the
server number of the server list in the
Server box.
3.
Enter the server unit number in the
Unit box.
For details on the registers and data types, see “Modbus Client Function” under “Modbus
Protocol Specifications” in section 5.2.
3.2 Communication Settings