Yokogawa Standalone MW100 - Manual (Page 185)

3-63
IM MW100-01E
Setting and Data acquisition
1
2
3
4
5
App
Index
Data View
From the Display Data list, select Alarm Summary, Manual Sample, Report - Digital, or
Report - Graph.
• Alarm Summary
Select a number of events from 30, 60, 100, 150. Also, the screen automatically
updates once per minute. You can also click the Update button to refresh the screen
manually.
Type
Shows the alarm level and type.
1-H
Alarm type (H/L/rH/rL/dH/dL/tH/tL)
Alarm level (1–to 4)
Number of displayed alarms
Sets the number of alarms to display.
Select displayed data
Select Alarm Summary.
Alarm time
Click to sort in ascending or
descending order.
Channels
Shows the channel on which the alarm occurred.
All Channels is displayed when an alarm ACK
operation is performed.
Click to sort in ascending or descending order.
When using the tag name display, sorting occurs
in alphabetical order.
• Manual Sample
Displays manual sample file data saved on the CF card. Click the Update button to
update* the data. Displays the latest manual sample file.
* If you click the Update button while writing of data to a file is in progress, the data might not
be displayed. After writing of the data, click the Update button again.
File name display
Displays the name of the
manual sample file.
Select displayed data
Select Manual Sample.
Scroll
Scrolls vertically or horizontally,
and changes the display range.
Manual sample execution time
Displays the time at which the manual sample
was performed.
3.16 Measured Data Monitor Display/Settings