App index – Yokogawa Standalone MW100 User Manual
Page 173
3-51
IM MW100-01E
Setting and Data acquisition
1
2
3
4
5
App
Index
Mail Client Setting 2
1.
From the top screen, click
Communication Setting > Mail Client Setting 2.
2.
Enter the subject of the e-mail in the
Subject box under Mail Header. Up to thirty-
two alphanumeric characters can be input.
3.
Enter the sender mail address in the
Sender box.
4.
Enter the recipient address in the
Recipient 1 box. Enter the address for
Recipient 2 in the same manner. You can specify multiple addresses for each
recipient. Separate each address with a space. You do not have to set both
recipients. Use up to 150 alphanumeric characters.
5.
To set up alarm notification, select an address for alarm notification in the
Alarm
Notification list. 1 and 2 sends notification to both recipient 1 and 2.
6.
Enter an alarm notification channel in the
Alarm Channel Set box under Alarm
Notification. To add instantaneous values, select the Instantaneous Data check
box. Specify channel numbers by delimiting them with dots as in 001.003.005, or
specify a range as in 004-008.
7.
To attach instantaneous values, select the
Instantaneous Data check box.
8.
For notification of reports, select a destination address for notification in the
Report Notification list.
1 and 2 sends notification to both recipient 1 and 2.
9.
Select the check boxes corresponding to the
Type of reports for which to send
notification under Report Notification.
10.
Select the
Content check box corresponding to the type of data with which to
send notification under Report Notification.
11.
To set up notification of data file creation, select a notification address in the
File
Creation Notification list.
12.
In the same manner as in step 7, set
Media Alarm Notification , Power Failure
Notification , and System Error Notification.
13.
To set up Periodic Report notification, select an address for notification in the
Periodic Report list.
14.
Select transmission interval time from the
Interval box under Periodic Report.
3.14 Network Utility Settings