PreSonus StudioLive AI Series - Manual (Page 17)

3 Networking Your StudioLive AI mixer
3.2 Step 2: Connect your Computer to your Network
StudioLive ™ AI Software Library
Reference Manual
13
4. Use the Value Encoder to scroll through the available networks.
5. When you have found the network you would like to use,
press the Store button to join.
Power User Tip: Your StudioLive AI mixer ships from the factory ready to connect to any
wireless network named “studiolive” with a password of “studiolive”. If you configure you
wireless router with this information, your StudioLive mixer will connect as soon as you
press Store.
6. Use the Value encoder and Next button to enter the password for your network.
When you are done, press the Store button to connect to the network. Every time
you turn on your StudioLive AI mixer, it will look for this network and attempt to
connect to it.
Please Note: the StudioLive only supports WPA and WPA2 security.If you do not see an IP
address appear within 10 seconds after pressing the Store button, verify that your router is
configured using one of these security protocols.
7. Once your mixer has successfully joined to your wireless
network, you will see an IP Number appear on the LCD and
your mixer is ready to be wirelessly remote controlled by
VSL-AI, SL Remote-AI, or QMix-AI.
3.2 Step 2: Connect your Computer to your Network
Windows 7+
1. Click on the network icon in the notification area to
open the Connect to Network Control Panel.
2. Select the same wireless network that you saved on your StudioLive AI mixer.
3. Enter the password.
4. Click Connect.
Mac OS X 10.7 and later
1. On the Menu bar click on the Wireless Status icon.
2. From the pull-down menu select the same wireless network
that you saved on your StudioLive AI mixer.
3. Enter the password.
4. Click Join.