PreSonus StudioLive AI Series - Manual (Page 60)

5 StudioLive Remote-AI for iPad
4.9 Smaart System Check Wizards
StudioLive ™ AI Software Library
Reference Manual
56
5 StudioLive Remote-AI for iPad
StudioLive Remote-AI (SL Remote-AI) for iPad provides an unprecedented
level of remote control over your StudioLive. With SL Remote-AI, you
can adjust level, pan, dynamics, bus routing, FX mixes, aux mixes, and
GEQ settings from an Apple iPad via a wireless network. All you need is
a Wi-Fi router and an Apple iPad, and you’re ready to get started.
Apple’s iPad offer two viewing options: Landscape and Portrait.
For the most part, you will hold your iPad in Landscape view. This will allow
you to use the Start, Overview, Aux Mix, GEQ, and Setup pages. Portrait view
provides you with a zoomed-in look at the currently selected channel and allows
you to scroll quickly through every channel and bus on your StudioLive.
To use StudioLive Remote-AI, you must first connect your StudioLive and iPad
to the same wireless network. See Section 3 for networking instructions.
To launch StudioLive Remote-AI, tap on the SL Remote-AI icon on your iPad.
When you launch StudioLive Remote-AI, you will be taken to the Start page.
On the Start page, you will see a list of every StudioLive AI mixer on the
network. The Start page also includes simulations for each of the three
StudioLive AI mixers so you can practice your finger control away from
your StudioLive. Tap on the Demo Mixers tab to view this list.
To connect to your mixer, tap on the StudioLive device icon. The
text will change color to alert you that it has been selected.
Tap the mixer you wish to control from your iPad to open SL Remote-AI.