PreSonus StudioLive AI Series - Manual (Page 67)

5 StudioLive Remote-AI for iPad
5.4 Scenes Page
StudioLive ™ AI Software Library
Reference Manual
63
Draw Tool. Allows You to Draw an EQ Curve with Your Finger.
SL Remote-AI provides flexible control over your graphic EQ settings. You
can control each band individually, or several bands at once, via the sliders,
or you can simply draw in an EQ curve and fine-tune from there.
To enable EQ-curve drawing, tap the Draw button and slide your finger over the
graphic EQ bands. Each band’s slider will snap to your finger as you pass over it.
5.4 Scenes Page
The Scenes page allows you to remotely recall scenes that have been stored on your
StudioLive AI mixer.
Scene List. Displays Stored Scenes
You can use the Scene list to scroll through the scenes you have
stored on the computer to which you are networked. Tap on a scene
to select it. A box will be drawn around it, indicating that it is selected
to load. The scene that is currently loaded will be highlighted.
Load Button. Loads Currently Selected Scene
Once you have selected the scene you would like to load, tap the Load button.
The scene will be highlighted in the Scene list, indicating that it is active.
Scroll Up/Down. Navigates Up or Down through the Scene List.
Use the Up and Down arrows to navigate through your Scene list one scene at a time.
5.5 Settings Page
The Settings page allows you to set scrolling and metering functions and to
create custom names for each channel, aux, and subgroup in your mix.
Scroll by Page. Scrolls Through Channels by Page.
When the Scroll by Page option is enabled, the mixer will scroll to through channels
by entire pages, rather than by individual channels. Turning this option off will
allow you to scroll over by a single channel and offer more granular control.
Scroll by Page can be enabled/disabled for both the Mixer and Aux pages.
Peak Hold Metering. Displays the Most Recent Signal Peak.
When Peak Hold Metering is enabled, each meter in SL Remote-AI will
continue to display the most recent signal peak. This allows you to
keep an eye on the average loudness of each channel’s signal.
Talkback Bus Assignments. Engages/Disengages Talkback Assignments.
Use these switches to remotely engage/disengage the Talkback bus assignments on
your StudioLive AI mixer.
Link Channel Faders. Links Channel Faders when Channels are Stereo Linked.
When Link Channel Faders is enabled, stereo-linked channels will no longer have
individual control over each fader in SL Remote-AI or VSL-AI. This allows you to
control the volume of a stereo channel pair by moving either channel’s fader.