PreSonus StudioLive AI Series - Manual (Page 63)

5 StudioLive Remote-AI for iPad
5.2 Aux Mix Page
StudioLive ™ AI Software Library
Reference Manual
59
Metering. Displays the Signal Level for Each Channel.
To the left of the fader, you will see the meter for the channel. The meter will follow
the meter mode selected on the StudioLive or from VSL-AI. The meter mode cannot
be changed from SL Remote-AI.
5.1.4 Masters Overview and Masters Section Page
In the upper right corner of every page in StudioLive Remote-AI (Overview, Aux
Mixer, and Main Graphic EQ), you will find the Masters Overview. This displays the
metering for the subgroups and main bus.
Tapping on the Masters Overview will open the Masters Section page.
The Masters Section page displays the fader and Fat Channel
Microviews for the mains, subgroups, as well as showing the FX
bus Mute buttons. These parameters are controlled in the same
way they are controlled for channels in the Overview page.
From the Masters Section Page, you can also remotely
control the Tap Tempo function for a delay loaded on either
the FXC or FXD buses. Tapping on it repeatedly will change
the Time parameter to match the tempo entered.
Tapping on any of the Fat Channel Microviews will close the
Masters Section page. The Fat Channel Zoom will open with
the selected parameter in focus for the selected bus.
To close the Masters Section page, simply tap anywhere outside it.
5.2 Aux Mix Page
The Aux Mix page shows the send level for each channel on each Aux and
FX bus. The Aux Mix page has two zones. The top zone allows you to scroll
through your Aux and FX buses. The bottom zone allows you to scroll
through the channel sends for the currently selected aux or FX bus. To
navigate right or left in either zone, touch anywhere in the upper or lower
half of the screen and swipe your finger to the left or right. Swiping left
scrolls the screen to the left. Swiping right scrolls the screen to the right.
From the Aux Mix page, you can control and view the following parameters:
• Channel Send
• Pre / Post Position
• Aux and FX Bus Gate, Compressor, and EQ Overview
• Aux and FX Bus Gate, Compression, and EQ Zoom
• Aux Bus GEQs
• Edit Effects
• Recall Effects
• Assign/Unassign Effects