PreSonus StudioLive AI Series - Manual (Page 53)

4 Universal Control-AI and VSL-AI
4.9 Smaart System Check Wizards
StudioLive ™ AI Software Library
Reference Manual
49
4.9.4 Go Remote
At any point during any of the Smaart System Check wizards, you can
switch over to iPad control using SL Remote-AI. This allows you to continue
to the next step of the wizard without having to walk back to front-of-
house, which is especially useful when placing your measurement mic.
1. Follow the instructions in Section 3 and network your
iPad, computer, and StudioLive AI mixer.
2. Launch SL Remote-AI on your iPad and connect to you StudioLive
from SL Remote-AI See Section 5 for more information.
3. SL Remote-AI will launch to a warning page telling
you that the device is under test.
4. From the Smaart System Check Wizards, click on the Go Remote button. This
will pull down a menu of connected iPads. Select your iPad from the list.
5. You can now continue the wizard from SL Remote-AI.
Power User Tip: An iPad does not have to be given front-of-house permission to
be listed in the Go Remote list. The advantage of this is that you can grab any iPad
that happens to be handy to take the Smaart System Check wizards with you.