PreSonus StudioLive AI Series - Manual (Page 30)

4 Universal Control-AI and VSL-AI
4.3 VSL-AI Overview Tab
StudioLive ™ AI Software Library
Reference Manual
26
4.3.4 FX Panel
The FX panel provides an overview of the FX send levels
for all four FX buses on every channel.
Power User Tip: To quickly set up an FX mix, use your mouse to set the
send level for Channel 1. Right-click on the Channel 1 send level and
sweep your mouse across the other channel sends for that FX bus. The
send level will be copied to every other channel for that FX bus.
The FX masters view allows you to select the FX type and adjust its parameters.
Use the tabs on the right of the FX Masters view to switch FX buses.
Tap Tempo (FXC and FX D only). VSL-AI allows you to remotely control the Tap
Tempo function for a delay loaded on both the FXC and FXD buses. Clicking on it
repeatedly will change the Time parameter to match the tempo entered.
4.3.5 Copying Mixes
Next to the main fader, and in each of the aux masters, you will see the Copy Mix
handle. When selected with your mouse, this handle lets you drag-and-drop the mix
for that bus to another bus. In this way, you can drag the main-fader mix to Aux 1 to
set a starting point and can quickly give the singer the same mix on two different
floor wedges.
Note: While the main mix can be copied to any aux, aux mixes can
only be copied to other aux mixes and not to the main mix.
4.3.6 Copying Channel Settings
VSL-AI provides you with two ways to copy channel settings from
one channel or bus to another. The first method functions essentially
like you StudioLive hardware; the second is unique to VSL-AI.
Copy Channel (Copy/Paste)
StudioLive AI mixers give you the ability to quickly copy-and-paste a single
channel or bus’s Fat Channel settings onto multiple channels and buses.
VSL-AI provides the same functionality in exactly the same way.
To copy a channel or bus, simply select it and click the Copy button. All the Select
buttons will flash. Click the Select buttons for the channels and buses to which you
want to copy the Fat Channel settings. When you are done, click Paste.
Note: Subgroup and main bus assignments are only copied from channel to channel.