PreSonus StudioLive AI Series - Manual (Page 9)

2 Connecting to a Computer
2.1 Installation for Windows
StudioLive ™ AI Software Library
Reference Manual
5
2 Connecting to a Computer
The Universal Control-AI installer includes the ASIO/WDM (Windows) and Core
Audio (OS X) drivers for the StudioLive AI-series mixers, as well as Universal
Control-AI, and Virtual StudioLive-AI. We made the Universal Control-AI installer
as simple and easy to follow as possible, and it will take you through each step
of the installation process. Please read each message carefully to ensure the
StudioLive driver and Universal Control-AI with VSL-AI are properly installed. In
particular, be careful not to connect your StudioLive to the computer too soon.
Please visit www.presonus.com for the latest system requirements
and an updated list of compatible hardware. It is also recommend
that you check your recording software’s system requirements.
Power User Tip: As part of our commitment to the quality of our products,
PreSonus continually updates its product drivers and software. Because of
this, it is wise to visit www.presonus.com and check for the latest driver build
before installing your product. Note: The speed of your processor, amount of
RAM, and capacity, size, and speed of your hard drives will greatly affect the
overall performance of your recording system. A faster processor and more
RAM can reduce signal latency (delay) and improve overall performance.
2.1 Installation for Windows
Before beginning the Universal Control-AI installation setup,
please quit all applications, including antivirus software, and
disconnect the StudioLive from your computer.
Follow the onscreen instructions to complete the installation. When the
installer has finished, it will prompt you to reboot your computer.
Click “Finish” to automatically restart your PC. Once your computer has
rebooted, connect the StudioLive. When the Found New Hardware wizard
launches, follow the “Recommended” steps.
Your StudioLive is now synced to your computer and ready to use!