PreSonus StudioLive AI Series - Manual (Page 31)

4 Universal Control-AI and VSL-AI
4.3 VSL-AI Overview Tab
StudioLive ™ AI Software Library
Reference Manual
27
Copy Channel (Drag-and-Drop)
At the top of the VSL-AI window, you will see the Copy Channel handle. This handle
follows the selected channel and lets you drag-and-drop all the Fat Channel and bus
assignments for that channel onto another channel or bus.
Note: Channel bus assignments are only copied from channel to channel.
VSL-AI also allows you to copy individual Fat Channel components from one channel
to another. For example, to copy only the Compressor setting from Channel 1, simply
drag and drop the Compressor microview to another channel.
4.3.7 Quickview
At the top of the Master Section of the Overview tab, you will find the Quickview.
This allows you to view the Focus GEQ, Mute Groups, and Quick Scene controls.
GEQ in Focus
In general, graphic EQ settings are created prior to a live show and
are not adjusted after that. However, minor adjustments sometimes
must be made later. VSL-AI makes this quick and easy.
You will have noticed that there is a GEQ above the
Master section on the Overview tab.
Here, you can focus any GEQ in one of two ways:
• Select a GEQ on the GEQ Tab. For example, if you leave Aux 8’s GEQ in focus
on the GEQ tab and switch back over to the Overview tab, you will still be
able to adjust Aux 8’s GEQ using the Focus GEQ above the Master section.
• Select the GEQ from the GEQ Focus Menu. In the upper left corner of the GEQ
in Focus, you will find a pull-down menu. From this menu, you can select
any of the 16/12/8 graphic EQs to put into focus on the Overview tab.